Products in "AA Accessories"
![]() |
Concentric Glass Nebulizer
The Concentric Glass nebulizer is the standard nebulizer supplied with the conical and cyclonic spray chambers... |
![]() |
ID100 Flame Autodilutor
Peristaltic pumps are used in some dilutors but require frequent replacement of consumable parts and often suffer from drifting performance... |
![]() |
Sea Spray High Solids Concentric Glass Nebulizer
Used in conjunction with Cyclone or Conical Spray Chamber. For use with all solvents EXCEPT HF. |
![]() |
VP100 Continuous Flow Vapour Generator
The VP100 Continuous Flow Vapour System performs hydride and mercury vapour measurements with significant sensitivity improvement over normal flame techniques... |
![]() |
Argon Humidifier Kit
The argon humidifier kit aids in reducing nebulizer and/or center tube clogs. |
![]() |
Burgener High-Solids Nebulizer
This nebulizer is used in conjunction with the CYCLONE Spray Chamber. May be used with all solvents. |
![]() |
CETAC ASX-520 / ASX-260 Autosampler
Maximize the number of samples that can be analysed in a single run by flame or vapor techniques. Rapid random access for the fastest analyses... |
![]() |
CETAC ASX-520 / ASX-260 Flame/Vapor Autosampler
Maximize the number of samples that can be analysed in a single run by flame or vapor techniques. Rapid random access for the fastest analyses... |
![]() |
Demountable Duo Torch Kit
Torch base with fully demountable injector tube, inner and outer quartz tubes... |
![]() |
Demountable Radial Torch Kit
Fully demountable torch kit for radial ICAP spectrometers... |
![]() |
EC90 Electrically Heated Atomisation Cell
Electrical heating instead of flame heating means you can optimise the atomisation temperature for each vapor element to get the highest sensitivity and the best precision... |
![]() |
FS95 Furnace Autosampler
The extra pair of hands in your laboratory. The FS95 Autosampler introduces samples into the graphite furnace as you would expect but it does a lot more besides... |
![]() |
GF95/GF95Z Graphite Furnace Systems
The GF95 and GF95ZGraphite Furnace Systems represent an ideal blend of leading edge furnace technology and functionality... |
![]() |
GFS97 Furnace/Autosampler pre-aligned module
On single atomizer S Series systems, flame/furnace changeover is a routine operation and the most time-consuming task... |
![]() |
Graphite Furnace TeleVision (GFTV)
Optimising the sample injection and dry/ash conditions in a furnace program are the keys to extracting the best performance from your system... |
![]() |
Hydride accessory
Integrated hydride generation accessory with high efficiency micro porous membrane gas liquid separator... |
![]() |
Polycon HF Nebulizer
Used in conjunction with Ultem Cyclone Spray Chamber... |
![]() |
Pumped Drain Kit
This kit is used for the conversion of a gravity drain spray chamber into a pumped drain system. |
![]() |
Slotted Tube Atom Trap (STAT)
Many samples, such as waters and beverages, have toxic metal levels that are too low for measurement by flame analysis but are very high for graphite furnace analysis... |
![]() |
V-Groove Nebulizer
Glass spray chambers supplies for removal of particles from aqueous or organic solutions... |
![]() |
Validator Kits
The unique flame, furnace and combined flame/furnace Validator kits provide all that is necessary for the user to carry out... |
![]() |
Validatorplus Accessory
The unique Calibrated Validation Unit (CVU) fits in both M and S Series spectrometers and carries out an automated series... |
![]() |
Water Cooled Conical Spray
The water-cooled conical spray chamber is used in conjunction with Temperature Controlled Recirculator... |
||





















